We Use It, We Sell It, And Of Course We Fix It!

  • Experience.
  • Quality.
  • Attention to detail.
  • Reliability.
  • Commitment to service after the sale.

The reasons why you rent and purchase your equipment from Atlanta Rigging Systems are the same reasons why you should have it serviced by ARS.

  • Experienced technicians on staff ready to assist you
  • Basic trouble shooting over the phone for many problems
  • Large inventory of parts in stock for Columbus McKinnon Loadstar hoists and Motion Laboratories control equipment
  • Fast turnaround time

Use Atlanta Rigging for your annual hoist inspection. Complete load testing and inspection services - in your shop or ours.

What does Atlanta Rigging do to insure that your hoists work properly?

When your chain motors are serviced by Atlanta Rigging, the entire condition of the hoist will be evaluated. Motor components and load chain are visually inspected, drive train is audibly evaluated, brake assembly is inspected and adjusted, upper and lower limits are checked (where applicable), and hoist is load tested to insure proper operation of the overload clutch. The same technicians who maintain our rental fleet of over 1,000 chain hoists perform all service.

If there are any problems, the client is contacted to approve any work before it is performed. ARS maintains a large inventory of hoist parts, improving turn around time when repairs are necessary.

Why have your hoists serviced?

By law all electric chain hoists must be inspected at least once a year by a competent person (ASME B30.16, 1999). This inspection includes the load chain, hooks, electrical connections, and general condition of the hoist. A written record of this inspection must be kept on file. A load test and reinspection of the hoist is required any time a load-bearing component is changed. This includes the drive gears and the overload clutch when applicable.

In addition, the manufacturer recommends that hoists that are used on the road be load tested annually to insure proper operation of the overload clutch.

 







Contact: Ben Brian Sales


EstaCert3

member
Atlanta Rigging Systems
1270 Tacoma Drive
Atlanta, GA 30318

Office (404) 355-4370
1-866-355-4370
Fax (404) 355-4360